|
TEXICAN
The introduction of this high quality
revolver will revolutionize the firearms industry. The STI Texican is the
first firearm of any type made using ultra-high speed precision machining.
Unlike conventional CNC machining, the surfaces of the finished parts are
perfectly smooth and straight; they do not require grinding or polishing, so
there are no rounded edges, no distorted screw holes. Flat surfaces are flat,
not wavy. The result: perfection.
Proudly made in the USA, the Texican sets itself apart from the other single
action revolvers. All Texican parts are either ultra-high speed or electron
discharge machined from chrome-moly steel forgings or bar stock (no castings)
to dimensions measured in tenths ( ten thousands of an inch), then precisely
installed, achieving an exactness of fit and smoothness of function not found
in custom revolvers at twice the price of the Texican.
The new Texican will find itself at home shooting popular cowboy action loads,
but when called upon is fully capable of safely shooting factory ammunition,
due to the high quality materials used in manufacturing and the precision
alignment of the chamber throats to the bore center of barrel. Competition
sights, springs, triggers and hammers eliminate the trip to your gunsmith you
might expect with other single action revolvers. Classic features like color
case hardening and bluing help to maintain the original look that is desirable
in the traditional single action revolver.
|
IMPORTANT NOTE:
As on the originals, solvent based cleaners can damage color case
hardening. STI does NOT recommend using any such cleaners on the
Texican. Doing so will void the warranty (on the finish only - it will
not affect warranty claims on the function of the pistol.) |
|
|
|
 |
|
Texican |
$1,260.00 |
|
|
Find an
FFL Near You
Find a Holster For Your STI |
|
| Caliber |
|
.45 L.C. (Long Colt) |
| Capacity |
|
6 Rounds |
| Frame |
|
Frame, back strap, loading gate, trigger guard, cylinders:
4140 re-sulphurized Maxell 3.5. Surfaces all flat with 6 micron or better
finish. |
| Grip |
|
"No crack" polymer |
| Barrel |
|
4140 Chrome Moly steel by Green Mountain Barrels. 1:16
twist, Air Gauged to .0002" |
| Barrel Length |
|
Currently Available in 5 1/2" (More lengths TBA) |
| Barrel Bore |
|
.451" |
| Cylinder Bore |
|
.452" |
| Chamber to Bore Alignment |
|
Less than .001" |
| Forcing Cone Angle |
|
Three (3) degrees |
| Cylinder Gap |
|
.003" |
| Internal Parts |
|
4140 CM steel, precisely Electron Discharge Machined |
| Hammer Spring |
|
Leaf with central spine slot |
| Pawl Spring |
|
"Free floating" leaf with 3-4X competition life |
| Firing Pin |
|
Hammer Firing Pin (no transfer bar) |
| Sights |
|
Front Fixed, Rear Fixed |
| Overall Length |
|
11" |
| Weight |
|
36.0 oz. |
| Finish |
|
Frames, loading gates, and hammers are Color Case Hardened
by Turnbull Restoration |
|
Miscellaneous |
|
Unique pawl rides on fixed
pivot
Front sight is adjusted for no side deviation
Front sight has enough material to adjust for reloaded ammunition
Competition ready. No tuning required |
| Competition Approvals |
|
S.A.S.S. (Single Action
Shooting Society) |
|
|
