Triggers

 

The STI trigger bow is wire EDM cut stainless steel, with a notch for trigger take up adjustment.  The trigger bow is a glass filled nylon polymer to prevent inertial firing, with a set screw for over-travel adjustment.

 

Trigger Part Number MSRP
Black TBD $30
Grey TBD $30
Blue TBD $30
Red TBD $30
Coyote Tan TBD $30
Olive Drab Green TBD $30

 

 

2011 Short Curve

Trigger Part Number MSRP
2011 Short Curve TBD $30

 

 

2011 Gunsmith Blank

Trigger Part Number MSRP
2011 Gunsmith Blank TBD $30

 

 

1911 Short Curve

Trigger Part Number MSRP
1911 Short Curve (Black) TBD $30

 

 

1911 Aluminum

Trigger Part Number MSRP
1911 Aluminum (Long) TBD $25

 

Magwells

 

Our new 2011 Tactical magwell!  Enhancements include lighter weight, side cutouts allowing ease of magazine removal during extreme clearance drills and an integral lanyard loop attachment hole.

 

2011 Tactical

 

Magwell Part Number MSRP
2011 Tactical Magwell TBD $73.50

 

 

 

All STI Magwells are a direct install to all STI 2011 pistols and frames (and yes, they DO fit in the IPSC Box.)

2011 Aluminum 

 

Magwell Part Number MSRP
2011 Aluminum Magwell TBD $45

 

 

2011 Stainless Steel

 

Magwell Part Number MSRP
2011 SS Magwell TBD $79.50

 

 

1911 Magwell (Slim)

 

Magwell Part Number MSRP
1911 Magwell (Slim) TBD $27

 

 

1911 Magwell (Standard)

 

Magwell Part Number MSRP
1911 Magwell (Std) TBD $27

 

 

MSH & Magwell

 

The STI 1911 Magwell is manufactured out of 4140 steel.  The Steel mainspring housing is checkered 30 LPI for a sure grip.  The magwell aids in faster reloads and in grip control of the pistol.  Available for both Thin and Standard width grips.

 

 

Magwell Part Number MSRP
MSH & Magwell (Std) TBD $73.95
MSH & Magwell (Thin) TBD $73.95

 

Safeties

 

STI thumb safeties are designed for both 1911 and 2011 pistols.  Offered in both ambidextrous and single sided models, the safeties have contoured & serrated pads that allow for the thumb to contact the safety in a natural position, providing a comfortable thumb placement for shooters.

Carbon steel is 4140, Stainless steel is 17-4

 

Ambidextrous Stainless Steel

Safety Part Number MSRP
Ambidextrous
Stainless Steel 
TBD $45

 

 

Ambidextrous Blued Steel

 

Safety Part Number MSRP
Ambidextrous
Blued Steel 
TBD $45

 

 

Single Sided Stainless Steel

 

Safety Part Number MSRP
Single Sided
Stainless Steel 
TBD $25

 

 

Single Sided Blue Steel

 

Safety Part Number MSRP
Single Sided 
Blued Steel 
TBD $25

 

Plugs

STI Spring plugs and Reverse plugs are manufactured from 4140 steel.

Available for 5″ & 6″ pistols.

 

 

Reverse Plug

Plug Part Number MSRP
Reverse Plug (5.0″) TBD $6.60

 

 

Spring Plug

 

Plug Part Number MSRP
Spring Plug (6.0″) TBD $9.18

Guide Rods

 

Guide Rod Part Number MSRP
5.0″ (Steel) One Piece TBD $15.75
6.0″ (Steel) Two Piece TBD $32.95

 

Grip Safeties

The STI high rise beavertail grip safety is designed for all 1911 and 2011 pistols.  It is produced out of 4140 steel or 17-4 stainless steel.  The safety arm is pre-notched, has a deeper strut groove, and pre-cut knuckle clearance, providing positive safety activation and comfortable high grip.  The grip safety can be removed without the removal of the mainspring housing (an industry first).

 

 

Stainless Steel Grip Safety

 

Safety Part Number MSRP
Stainless Steel Grip Safety TBD $30.73

 

 

Blued Steel Grip Safety

 

Safety Part Number MSRP
Blued Steel Grip Safety TBD $28.10

Hammers

STI hammers are wire EDM cut, then precision groun and polished from A-6 tool steel.  STI sears are wire EDM cut using S-7 tool steel, producing the highest quality hammer and sear for crisp and lightweight trigger pulls.  STI Hammers are available in three styles: Commander, Spur, and Sear.

 

Commander Hammer

 

Hammer Part Number MSRP
Commander TBD $44.95

 

 

Spur Hammer

 

Hammer Part Number MSRP
Spur TBD $44.95

 

 

Square Hammer

 

Hammer Part Number MSRP
Square TBD $44.95

 

 

Sear

 

Sear Part Number MSRP
TBD $21

 

Ejector

 

The STI ejector is manufactured out of 4140 steel.

Available in the following specific calibers: .45 ACP, .40 S&W, .38 Super, & 9mm extended.

 

 

Caliber Part Number MSRP
.45 TBD $27.95
.38 / .40 TBD $27.95
9mm Extended TBD $27.95

 

Extractor

The STI extractor is manufactured out of high quality spring steel.  Available in 9×19, .38 Super, .40 S&W, or .45 ACP.

Extractor Part Number MSRP
.45 TBD $23.95
.38 / .40 TBD $23.95
9mm TBD $23.95

 

Firing Pin Stops

STI Firing pin stop is 4140 steel.  Available standard or cut for Bomar sights.

 

 

Firing Pin Stop Part Number MSRP
9mm / .38 / .40 TBD $11.49
9mm / .38 / .40 Bomar TBD $11.49
.45 TBD $11.49
.45 Bomar TBD $11.49

 

Slide Stop

 

The STI slide stop is 4140 carbon steel heat treated to 38 -42 Rockwell hardness, creating a very precise slide stop.

 

Slide Stop Part Number MSRP
TBD $24

 

Hammer Strut

STI Hammer struts are wire EDM cut from Titanium.  This allows for very fast lock up and adds minimum weight to the entire trigger system, aiding in even crisper and lighter trigger weight.

Titanium Strut Part Number MSRP
TBD $14.55

 

Disconnector

The STI Disconnector is made out of FN 0205 steel; a perfect addition to the STI Hammer and Sear.

 

 

Disconnector Part Number MSRP
TBD $14.75

 

Sear Spring

 

The STI Sear Spring is made of high quality spring steel.  It is the classic 3 prong configuration and features a wider base than many models, for a more secure fit and more reliable function.

 

 

Sear Spring Part Number MSRP
TBD $5.25

 

Firing Pins

 

STI Firing pins are available in stainless steel or titanium.  Calibers: 9×19 / .38 / .40 / .45

 

 

Firing Pin Part Number MSRP
Stainless (9 / .38 / .40) TBD $7.50
Titanium (9 / .38 / .40) TBD $19.95
Stainless (.45) TBD $7.50
Titanium (.45) TBD $19.95

Printed from: http://www.stiguns.com/small-parts/

Scan to visit this page: